Monster Train 2: Beginner's Guide and Best Settings
How runs, clans, floors and cards fit together in Monster Train 2, which PC settings suit your hardware, and how to use the trainer without spoiling the game.
How a Run Works
Monster Train 2 is a strategy deckbuilder built around runs. You leave the Covenant Outpost and ride your train through Hell, Heaven and the Abyss, collecting cards and upgrades between battles until you either beat the Titans or fall. Win or lose, you return to the Outpost, where story scenes play out and new options unlock. Early runs will often end in defeat, and that is normal for the genre: a failed run still shows you which cards and combinations pulled their weight.
Before each departure you pick your clans and, once you have unlocked one, a Pyre Heart. Each Pyre Heart changes how the run plays and also advances the story, so unlocking them pays off twice. You can save at any point and pick a run back up later. Nothing is on a timer either, so take as long as you need to read the enemy's intentions and your hand before you commit.
- Use your first few runs to learn how enemies behave.
- Check the Logbook between runs for enemy information and collection goals.
- Save and quit mid-run rather than rushing turns to finish a session.
- Start on a lower difficulty; the setting can be adjusted.
Choosing Clans and Building Your Deck
The base game has five clans, each with its own strengths and style. DLC expands that list: Destiny of the Railforged brought the Wurmkin, and The Punished adds a clan of the same name with new mechanics and Artifacts. When starting out, pick one pairing and keep it for several runs. You learn far more about how two clans interact that way than by switching every time.
A lean deck usually beats a bloated one, as in most deckbuilding roguelikes. Each extra card lowers the odds of drawing your key pieces when they matter. Upgrading a card you already rely on is often worth more than adding a mediocre new one. Recruit units that serve a clear plan, such as holding a floor or dealing heavy damage, and pass on rewards that drag the deck toward a strategy it cannot complete.
- Stay with one clan pairing for a few runs before experimenting.
- Upgrade strong cards instead of adding filler.
- Decide early how your deck wins and draft toward it.
- Skipping a card reward is often the right call.
Defending Three Floors
Your train has three vertical levels to defend, and where you place units decides most battles. A common approach in this style of game is to put sturdy units where enemies arrive to soak up pressure, with damage dealers positioned to finish off whatever gets through. Each floor has limited capacity, so you cannot pile every unit into one spot.
Room Cards and Equipment Cards are what lift a decent deck into a strong one. Rooms add boosts to your train that change how a floor performs, while equipment attaches to a unit and grants it bonuses in battle. Treat rooms as long-term investments in a floor and equipment as a way to turn a single unit into the anchor of your defence. Some equipment, such as Boilerplate, ties into a Forge Points system, which suggests certain pieces are built to grow over a run.
- Read enemy intentions each turn before placing units.
- Keep enough defence in reserve that no floor is left wide open.
- Build one floor into a reliable kill zone rather than spreading thin.
- Give Equipment Cards to units that survive several turns.
Modes Beyond the Main Run
Standard runs are only part of the game. Dimensional Challenges are handcrafted scenarios with their own Mutators and cosmetic rewards. Daily Challenges serve up a heavily modified run each day, scored on skill, with leaderboards for friends and the wider player base. A separate mode keeps raising the difficulty for as long as you survive and lets you compare stats with friends.
Mid-run, you will run into Celestial Alcoves: random events that can hand out rewards such as Artifacts, along with the odd surprise from outside the Monster Train universe. Patch 2.1 added win streak tracking to Soul Savior, with a separate streak for each difficulty. Train Customization unlocks parts that change your train's appearance. You do not need any of this to finish the story, but it gives long-term players plenty to chase.
- Try Dimensional Challenges after your first clear for focused practice.
- Keep Daily Challenge runs unmodified if the leaderboard matters to you.
- Read each Celestial Alcove reward in full before picking one.
PC Settings and Performance
The requirements are modest. At minimum you need an Intel Core i5-4670K or AMD FX-4350, 8 GB of RAM, and a GeForce GTX 760, Radeon R7 260X or Intel UHD Graphics 630, which targets the Low Quality setting at 1080p and 60 FPS on DirectX 11. Windows 10 64-bit is the minimum operating system, and the install takes about 3 GB. If your PC sits near that level, lower the quality setting first.
The recommended spec, an Intel Core i5-9600 or AMD Ryzen 5 1600 with 16 GB of RAM and a GeForce GTX 1080 or Radeon RX 5700, targets High Quality at 1080p and 60 FPS on DirectX 12 and Windows 11. Since nothing in the game depends on timed input, a frame rate under 60 will not cost you fights, so older machines can trade visuals for stability. Keep the game patched: hotfix 2.0.4 fixed a slowdown caused by Boilerplate equipment with large amounts of Forge Points.
- On integrated graphics, start with Low Quality at 1080p.
- If stutter persists, drop the resolution next.
- A GTX 1080 class card or better should match the recommended High Quality, 1080p, 60 FPS target.
- On 8 GB systems, close background programs; the recommended spec calls for 16 GB.
- Install updates promptly; recent hotfixes addressed a slowdown and a softlock.
Using the Trainer in Monster Train 2
The trainer offers Infinite Pyre Health, Unlimited Ember, Unlimited Gold, Infinite Floor Capacity, Invincible Units, One-Hit Kills, Max Unit Attack, Extra Card Draw and Game Speed. Their best use is learning. With Infinite Pyre Health you can see a run through to the end while studying how a clan plays. Infinite Floor Capacity and Extra Card Draw let you test combinations that are hard to assemble normally, and Game Speed cuts down waiting during repeated tests.
Keep the trainer to casual single-player runs. Leave it off in Daily Challenges and anything tied to a leaderboard or win streak, since it skews the results other players compare against. Back up your save files before enabling anything: the game uses Steam Cloud, so a modified save can sync to your other devices, and a separate copy gives you something to restore. One-Hit Kills and Invincible Units strip out most of the challenge, so switch them off when you want a win that means something.
- Back up your saves before turning on any option.
- Stay out of Daily Challenges and leaderboard modes while the trainer is active.
- Use Infinite Pyre Health on its own to learn a clan without trivialising combat.
- Enable one option at a time so you can tell what changed.
- Turn options off before any run you want counted toward a streak.
Controls and Accessibility
You can play with a controller, including DualShock and DualSense pads, and the game supports the Steam Input API. Keyboard-only and mouse-only options are also available, which helps if one hand tires during a long session. Custom volume controls let you balance music against effects, and Steam lists the game as camera comfortable.
There is an undo function, and several patch notes fix failures related to it. If you misplay, check whether you can undo before you end your turn. Adjustable difficulty and the absence of timed input make the game forgiving for newcomers. Family Sharing is supported, and Steam Cloud keeps your progress in sync if you play on more than one PC.
- Try mouse-only play for a relaxed, one-handed setup.
- Undo before ending your turn, not after.
- Lower the difficulty while learning a new clan.
FAQ
How many clans does Monster Train 2 have?
Five in the base game. DLC adds more: Destiny of the Railforged brought the Wurmkin, and the second DLC adds The Punished clan.
Can I run Monster Train 2 on integrated graphics?
Intel UHD Graphics 630 is on the minimum requirements list, targeting the Low Quality setting at 1080p and 60 FPS. You also need at least 8 GB of RAM and 64-bit Windows 10.
Can I save in the middle of a run?
Yes. You can save at any time, and Steam Cloud syncs your progress between PCs.
Does Monster Train 2 work with a controller?
Yes. It has full controller support, including DualShock and DualSense pads, and can also be played with keyboard only or mouse only.
Should I use the trainer in Daily Challenges?
No. Daily Challenges feed leaderboards for friends and other players, so save trainer options for casual single-player runs and practice.
Comments
No comments yet
Be the first to share your thoughts.